ホーム 計算ツール
代理店ログイン

α-NETA

カタログ番号 T61454   CAS 115066-04-1

α-NETA is a potent and noncompetitive choline acetyltransferase (ChA) inhibitor with an IC 50 of 9 μM. α-NETA is a potent ALDH1A1 ( IC 50 =0.04 μM) and chemokine-like receptor-1 (CMKLR1) antagonist. α-NETA weakly inhibits cholinesterase (ChE; IC 50 =84 μM) and acetylcholinesterase (AChE; IC 50 =300 μM). α-NETA has anti-cancer activity [1] [2].

TargetMolの製品は全て研究用試薬です。人体にはご使用できません。 また、個人の方への販売は行っておりません。
α-NETA, CAS 115066-04-1
パッケージサイズ 在庫状況 単価(税別)
25 mg 約6-8 週間 お問い合わせ
50 mg 約6-8 週間 お問い合わせ
100 mg 約6-8 週間 お問い合わせ
ご確認事項

1. 1研究室・グループあたり最大5製品までお申し込みいただけます。 同一製品は1回のみとなります。

2. 1回につき最大2製品までのお申し込みが可能です。

3. 2回目以降をご希望の際は、前回ご提供のサンプルの実験結果をオンラインでご提供いただく必要がございます。

4. 2023 年 1 月 20 日より前にサンプルをお申し込みいただいたお客様は、2023 年の無料申請枠にはカウントされませんが、以前の実験結果をご提供いただく必要があります。

Get quote
バッチの詳細情報はお問い合わせください
生物学的特性に関する説明
化学的特性
保存条件 & 溶解度情報
説明 α-NETA is a potent and noncompetitive choline acetyltransferase (ChA) inhibitor with an IC 50 of 9 μM. α-NETA is a potent ALDH1A1 ( IC 50 =0.04 μM) and chemokine-like receptor-1 (CMKLR1) antagonist. α-NETA weakly inhibits cholinesterase (ChE; IC 50 =84 μM) and acetylcholinesterase (AChE; IC 50 =300 μM). α-NETA has anti-cancer activity [1] [2].
In vitro α-NETA (50-150 nM; 24 hours) decreases all cell lines viability in a dose-dependent manner [3]. α-NETA (2.5-10.0 μg/mL; 24 hours) leads to epithelial ovarian cancer (EOC) cell death associated with membrane blistering and cytoplasm leakage [3]. α-NETA treatment increases EOC cell expression of pyroptosis-associated proteins [3]. α-NETA is most potent in inhibiting aldehyde dehydrogenase 1 family, member A1 (ALDH1A1; IC 50 =0.04 μM; purified enzymes assay), followed by CMKLR1 (IC 50 =0.375 μM for β-ARR2 recruitment; Cell-based assay) and G9a histone lysine methyltransferase (IC 50 =0.50 μM; purified enzymes assay). α-NETA selectively inhibits chemerin-stimulated CMKLR1 association with β-arrestin2 [2]. α-NETA possesses fluorescent characteristics (excitation spectrum: maxima 255 and 297 nm; emission spectrum: maximum 437 nm) of naphthyl moiety [1]. Cell Viability Assay [3] Cell Line: Ho8910, Ho8910PM, A2780, and Iose80 cells Concentration: 50, 100, 150 nM Incubation Time: 24 hours Result: Decreased all cell lines viability in a dose-dependent manner. Apoptosis Analysis [3] Cell Line: Epithelial ovarian cancer (EOC) cell Concentration: 2.5, 7.5, 10.0 μg/mL Incubation Time: 24 hours Result: Led to EOC cell death associated with membrane blistering and cytoplasm leakage.
In vivo Administration of α-NETA (intraperitoneally, i.p.; 0.125 mg/kg; once every other day over a span of 20 days) significantly reduced both the volume and weight of tumors in BALB/c nude mice with SKOV3 cells [3]. When injected subcutaneously (s.c.; at doses of 3 mg/kg or 10 mg/kg; daily for 30 days), α-NETA markedly delayed the onset of Experimental Autoimmune Encephalomyelitis (EAE) at a dosage of 3 mg/kg, and at 10 mg/kg, it completely halted the clinical symptoms for an average duration of nine days following the initial disease manifestation in control female C57BL/6 mice [2].
分子量 369.246
分子式 C16H20INO
CAS No. 115066-04-1

保存条件

Powder: -20°C for 3 years | In solvent: -80°C for 1 year

投与量変換

You can also refer to dose conversion for different animals. 詳細

In vivo投与量計算 (透明溶液)

ステップ1: 以下の情報を入力してください
投与量
mg/kg
動物の平均体重
g
動物あたりの投与量
ul
動物数
溶媒の組成を入力してください
% DMSO
%
% Tween 80
% ddH2O
計算する リセット

計算器

モル濃度計算機
希釈計算機
再構成計算
分子量計算機
=
X
X

モル度計算機では以下の計算が可能です

  • 既知の体積と濃度の溶液を調製するために必要な化合物の質量
  • 質量が既知の化合物を目的の濃度まで溶解させるのに必要な溶液の量
  • 特定の体積の中に既知の質量の化合物を入れて得られる溶液の濃度
参考例

モル濃度計算機を使用したモル濃度計算の例
化合物の分子量が197.13g/molである場合、10mlの水に10mMのストック溶液を作るのに必要な化合物の質量はどれくらいですか?
[分子量(MW)]の欄に[197.13]と入力してください
[濃度]ボックスに10と入力し、正しい単位(millimolar)を選択します
[容量]ボックスに10と入力し、正しい単位(milliliter)を選択します
計算を押します
答えの19.713mgが質量欄に表示されます

X
=
X

溶液を作るのに必要な希釈率の計算

溶液の調製に必要な希釈率の算出
希釈計算機は、既知の濃度の原液をどのように希釈するかを計算することができる便利なツールです。V1を計算するためにC1、C2&V2を入力します。

参考例

Tocrisの希釈計算器を用いた希釈計算の一例
50μMの溶液を20ml作るためには、10mMの原液を何ml必要ですか?
C1V1=C2V2という式を用いて、C1=10mM、C2=50μM、V2=20ml、V1を未知数とします。
濃度(開始)ボックスに10を入力し正しい単位(millimolar)を選択してください
濃度(終了)ボックスに50を入力し正しい単位(millimolar)を選択してください
体積(終了)ボックスに20を入力し正しい単位(millimolar)を選択してください
計算を押します
100 microliter (0.1 ml) という答えが体積(開始)ボックスに表示されます。

=
/

バイアルを再構成するのに必要な溶媒の量を計算する.

再構成計算機を使えば、バイアルを再構成するための試薬の量をすぐに計算することができます.
試薬の質量と目標濃度を入力するだけで計算します。

g/mol

化合物の化学式を入力して、そのモル質量や元素組成を計算します

Tヒント:化学式は大文字と小文字を区別します。: C10H16N2O2 c10h16n2o2

化合物のモル質量(分子量)を計算する手順:
化学物質のモル質量を計算するには、その化学式を入力し、「計算」をクリックしてください。.
分子質量、分子量、モル質量、モル重量の定義:
分子質量(分子量)とは、物質の1分子の質量であり、統一された原子質量単位(u)で表されます。(1uは炭素12の1原子の質量の1/12に等しい)
モル質量(molar weight)とは、ある物質の1モルの質量のことで、単位はg/molです。

bottom

技術サポート

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc.

Keywords

α-NETA 115066-04-1 Inhibitor inhibitor inhibit