ホーム 計算ツール
代理店ログイン

MDK83190

カタログ番号 T1772   CAS 79183-19-0
別名: Apoptosis Activator 2

MDK83190 (Apoptosis Activator 2) is a potent apoptosis activator, induceing caspase-3 activation, PARP cleavage, and DNA fragmentation .

TargetMolの製品は全て研究用試薬です。人体にはご使用できません。 また、個人の方への販売は行っておりません。
MDK83190, CAS 79183-19-0
パッケージサイズ 在庫状況 単価(税別)
サンプルについてお問い合わせ
5 mg 在庫あり ¥ 8,000
10 mg 在庫あり ¥ 12,500
25 mg 在庫あり ¥ 26,000
50 mg 在庫あり ¥ 37,000
100 mg 在庫あり ¥ 66,000
200 mg 在庫あり ¥ 108,000
1 mL * 10 mM (in DMSO) 在庫あり ¥ 13,500
ご確認事項

1. 1研究室・グループあたり最大5製品までお申し込みいただけます。 同一製品は1回のみとなります。

2. 1回につき最大2製品までのお申し込みが可能です。

3. 2回目以降をご希望の際は、前回ご提供のサンプルの実験結果をオンラインでご提供いただく必要がございます。

4. 2023 年 1 月 20 日より前にサンプルをお申し込みいただいたお客様は、2023 年の無料申請枠にはカウントされませんが、以前の実験結果をご提供いただく必要があります。

Get quote
バッチを選択  
バッチの詳細情報はお問い合わせください
生物学的特性に関する説明
化学的特性
保存条件 & 溶解度情報
説明 MDK83190 (Apoptosis Activator 2) is a potent apoptosis activator, induceing caspase-3 activation, PARP cleavage, and DNA fragmentation .
ターゲット&IC50 Leukemia origin cells:4-9 uM (IC50)
In vitro Apoptosis Activator 2 (20 μM) at the reduced cyto c concentration increases the fraction of Apaf-1 in the apoptosome by 1.5-fold to 33%. Apoptosis Activator 2 increases the extent of caspase-3 activation at the reduced level of cyto c and caspase-3 activation by 4-fold. Apoptosis Activator 2 strongly indues caspase-3 activation, PARP cleavage, and DNA fragmentation, and finally killing cells with an IC50 of 4 μM. Apoptosis Activator 2 induces apoptosis of PBL, HUVEC, Jurkat, Molt-4, CCRF-CEM, BT-549, MDA-MB-468 and NCI-H23 with of IC50 of 50 μM, 43 μM, 4 μM, 6 μM, 9 μM, 20 μM, 44 μM and 35 μM. Apoptosis Activator 2 exerts a cytostatic effect on the majority of tumor cell lines tested, inhibiting cell growth by 50-100% at 10 μM in 40 of 48 cell lines tested. [1] Apoptosis Activator 2 induces cell death by triggering apoptosome formation. The level of En1 expression does not have a significant influence on the survival rates of Ventral midbrain cultures for Apoptosis Activator 2 (-8.1 ± 6.0%). Survival rate is not significantly altered if the other three reagents are employed (-10.7 ± 4.7%) for Apoptosis Activator 2. [2] Apoptosis activator 2 (10 μM) induces apoptosis in AGS cells as evaluated by apoptotic DNA ladder and Tunel assay. Apoptosis activator 2 (10 μM) enhances the induction of apoptosis by anti TROP2 conjugated liposomes. [3] Cyclohexamide (10 μg/mL) or zVAD (50 μM) significantly protects against Apoptosis Activator 2 toxicity in neuroneal cultures. Apoptosis activator 2 (3 μM) results in numerous neurones with pyknotic nuclei suggestive of cell death involving apoptosis. DHT (10 nM) or E2 (10 nM) significantly protects against Apoptosis Activator 2 toxicity in neuroneal cultures. [4]
キナーゼ試験 Cell-Free Apoptosis Assay: HeLa cell cytoplasmic extracts are prepared according to previously published reports. Apoptosis Activator 2 in DMSO are distributed into 96-well microtiter plates at a final concentration of 1 mM (final DMSO concentration is 1% vol/vol). To each well is added 250 μg of total protein from cytoplasmic extracts in HEB buffer (50 mM Hepes, pH 7.4/50 mM KCl/5 mM EGTA/2 mM MgCl), with 2 mM DTT, 2 μM cyto c, and 0.5 μM DEVD-AFC (Asp-Glu-Val-Asp-7-amino-4-trifluoromethylcoumarin) substrate in a total of 150 μL. Plates are incubated at 37 ℃, and fluorescence is read in a LJL Biosystems plate reader at 10-min intervals.
細胞研究 All viable cells within the defined field of a microscope reticle grid are counted using a manual mechanical counter by an experimenter blinded to condition. Cells are scored viable on the basis of both positive staining with the vital dye calcein acetoxymethyl ester and the morphological criterion of a smooth, spherical soma. Counts of viable cells are made in four non-overlapping fields per culture well with each condition represented by 3 separate wells. The number of viable cells counts per well for vehicle-treated control conditions ranged from 100-200. All experiments are repeated in at least 3 independent culture preparations. Raw cell count data are statistically analyzed with one-way ANOVA, followed by between group comparisons using the Fisher LSD test (significance indicated by P < 0.05). Cell viability is presented graphically as a percentage of live cells in the vehicle-treated control condition.(Only for Reference)
別名 Apoptosis Activator 2
分子量 306.14
分子式 C15H9Cl2NO2
CAS No. 79183-19-0

保存条件

Powder: -20°C for 3 years | In solvent: -80°C for 1 year

溶解度情報

DMSO: 30.6 mg/mL (100 mM)

Ethanol: 1.5 mg/mL (5 mM)

参考文献

1. Nguyen JT, et al. Proc Natl Acad Sci U S A, 2003, 100(13), 7533-7538. 2. Alavian KN, et al. Neural Dev, 2009, 16(4), 11. 3. Farivar TN, et al. N Am J Med Sci, 2012, 4(11), 582-585. 4. Nguyen TV, et al. J Neuroendocrinol, 2010, 22(9), 12013-1022.

関連化合物ライブラリー

この製品は下記化合物ライブラリに含まれています:
Anti-Neurodegenerative Disease Compound Library Autophagy Compound Library Bioactive Compounds Library Max Pyroptosis Compound Library Target-Focused Phenotypic Screening Library NO PAINS Compound Library Covalent Inhibitor Library Bioactive Compound Library Apoptosis Compound Library Anti-Cancer Compound Library

関連製品

同一標的の関連化合物
β-Elemene Neogambogic acid Epirubicin hydrochloride Embelin 3'-Hydroxypterostilbene PHA-793887 9-dihydro-13-acetylbaccatin III AZ 628

投与量変換

You can also refer to dose conversion for different animals. 詳細

In vivo投与量計算 (透明溶液)

ステップ1: 以下の情報を入力してください
投与量
mg/kg
動物の平均体重
g
動物あたりの投与量
ul
動物数
溶媒の組成を入力してください
% DMSO
%
% Tween 80
% ddH2O
計算する リセット

計算器

モル濃度計算機
希釈計算機
再構成計算
分子量計算機
=
X
X

モル度計算機では以下の計算が可能です

  • 既知の体積と濃度の溶液を調製するために必要な化合物の質量
  • 質量が既知の化合物を目的の濃度まで溶解させるのに必要な溶液の量
  • 特定の体積の中に既知の質量の化合物を入れて得られる溶液の濃度
参考例

モル濃度計算機を使用したモル濃度計算の例
化合物の分子量が197.13g/molである場合、10mlの水に10mMのストック溶液を作るのに必要な化合物の質量はどれくらいですか?
[分子量(MW)]の欄に[197.13]と入力してください
[濃度]ボックスに10と入力し、正しい単位(millimolar)を選択します
[容量]ボックスに10と入力し、正しい単位(milliliter)を選択します
計算を押します
答えの19.713mgが質量欄に表示されます

X
=
X

溶液を作るのに必要な希釈率の計算

溶液の調製に必要な希釈率の算出
希釈計算機は、既知の濃度の原液をどのように希釈するかを計算することができる便利なツールです。V1を計算するためにC1、C2&V2を入力します。

参考例

Tocrisの希釈計算器を用いた希釈計算の一例
50μMの溶液を20ml作るためには、10mMの原液を何ml必要ですか?
C1V1=C2V2という式を用いて、C1=10mM、C2=50μM、V2=20ml、V1を未知数とします。
濃度(開始)ボックスに10を入力し正しい単位(millimolar)を選択してください
濃度(終了)ボックスに50を入力し正しい単位(millimolar)を選択してください
体積(終了)ボックスに20を入力し正しい単位(millimolar)を選択してください
計算を押します
100 microliter (0.1 ml) という答えが体積(開始)ボックスに表示されます。

=
/

バイアルを再構成するのに必要な溶媒の量を計算する.

再構成計算機を使えば、バイアルを再構成するための試薬の量をすぐに計算することができます.
試薬の質量と目標濃度を入力するだけで計算します。

g/mol

化合物の化学式を入力して、そのモル質量や元素組成を計算します

Tヒント:化学式は大文字と小文字を区別します。: C10H16N2O2 c10h16n2o2

化合物のモル質量(分子量)を計算する手順:
化学物質のモル質量を計算するには、その化学式を入力し、「計算」をクリックしてください。.
分子質量、分子量、モル質量、モル重量の定義:
分子質量(分子量)とは、物質の1分子の質量であり、統一された原子質量単位(u)で表されます。(1uは炭素12の1原子の質量の1/12に等しい)
モル質量(molar weight)とは、ある物質の1モルの質量のことで、単位はg/molです。

bottom

技術サポート

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc.

Keywords

MDK83190 79183-19-0 Apoptosis Proteases/Proteasome Caspase Apoptosis Activator 2 Inhibitor MDK-83190 inhibit MDK 83190 inhibitor