ホーム 計算ツール
代理店ログイン

Naftopidil

カタログ番号 T0696   CAS 57149-07-2
別名: KT-611, BM-15275

Naftopidil (KT-611) (INN, marketed under the brand name Flivas), an antihypertensive medicine, is used as a selective α1-adrenergic receptor antagonist or α-blocker.

TargetMolの製品は全て研究用試薬です。人体にはご使用できません。 また、個人の方への販売は行っておりません。
Naftopidil, CAS 57149-07-2
パッケージサイズ 在庫状況 単価(税別)
サンプルについてお問い合わせ
500 mg お問い合わせ ¥ 9,500
1 g お問い合わせ ¥ 15,500
1 mL * 10 mM (in DMSO) 在庫あり ¥ 10,500
ご確認事項

1. 1研究室・グループあたり最大5製品までお申し込みいただけます。 同一製品は1回のみとなります。

2. 1回につき最大2製品までのお申し込みが可能です。

3. 2回目以降をご希望の際は、前回ご提供のサンプルの実験結果をオンラインでご提供いただく必要がございます。

4. 2023 年 1 月 20 日より前にサンプルをお申し込みいただいたお客様は、2023 年の無料申請枠にはカウントされませんが、以前の実験結果をご提供いただく必要があります。

Get quote
バッチを選択  
バッチの詳細情報はお問い合わせください
生物学的特性に関する説明
化学的特性
保存条件 & 溶解度情報
説明 Naftopidil (KT-611) (INN, marketed under the brand name Flivas), an antihypertensive medicine, is used as a selective α1-adrenergic receptor antagonist or α-blocker.
ターゲット&IC50 α1B-adrenoceptor:20 nM(Ki), α1A-adrenoceptor:3.7 nM(Ki), α1D-adrenoceptor:1.2 nM(Ki)
In vitro Naftopidil is selective for the alpha1d-adrenoceptor with approximately 3- and 17-fold higher affinity than for the alpha1a- and alpha1b-adrenoceptor subtypes, respectively. [1] Naftopidil has growth inhibitory effect in androgen-sensitive and -insensitive human prostate cancer cell lines. Naftopidil induces p21(cip1) but not p27(kip1) in PC-3 cells. [2] Naftopidil induces apoptosis in all the investigated malignant mesothelioma cells, and a similar effect is obtained with prazosin, another α1-adrenoceptor blocker. Naftopidil-induced reduction in cell viability is inhibited by GF109203X, while prazosin-induced in cell viability is less affected. [3] Naftopidil, an alpha 1-adrenoreceptor antagonist produces a concentration-dependent inhibition ofcollagen-induced Ca2+ mobilization, maximum inhibition (22.9%) occurring with 40 mM Naftopidil. Naftopidil also inhibits the adrenaline-induced rise in [Ca2+]i in a concentration-dependent manner (30 mM doxazosin), significant inhibitions of platelet aggregation also being produced. [4] Naftopidil (0.3, 1, and 3 μM) inhibits 5-HT-induced bladder contraction in a concentration-dependent manner. Naftopidil inhibits both the 5-HT(2A) and 5-HT(2) receptor agonists-induced bladder contractions. Naftopidil binds to the human 5-HT(2A) and 5-HT(2B) receptors with pKi values of 6.55 and 7.82, respectively. [5]
In vivo Naftopidil selectively inhibits the phenylephrine-induced increase in prostatic pressure compared with mean blood pressure in the anesthetized dog model. [1] Naftopidil inhibits 5-HT-induced bladder contraction via blockade of the 5-HT(2A) and 5-HT(2B) receptors in rats. [5]
別名 KT-611, BM-15275
分子量 392.49
分子式 C24H28N2O3
CAS No. 57149-07-2

保存条件

Powder: -20°C for 3 years | In solvent: -80°C for 1 year

溶解度情報

H2O: < 1 mg/mL (insoluble or slightly soluble)

Ethanol: < 1 mg/mL (insoluble or slightly soluble)

DMSO: 73 mg/mL (186 mM)

参考文献

1. Takei R, et al. Jpn J Pharmacol,1999, 79(4), 447-454. 2. Kanda H, et al. Int J Cancer,2008, 122(2), 444-451. 3. Masachika E, et al. Anticancer Res,2013, 33(3), 887-894. 4. Alarayyed NA, et al. Br J Clin Pharmacol,1997, 43(4), 415-420. 5. Sakai T, et al. Eur J Pharmacol,2013, 700(1-3), 194-200.

関連化合物ライブラリー

この製品は下記化合物ライブラリに含まれています:
Anti-Neurodegenerative Disease Compound Library GPCR Compound Library Anti-Cancer Drug Library Anti-Cancer Approved Drug Library Inhibitor Library Anti-Cancer Clinical Compound Library Membrane Protein-targeted Compound Library Drug Repurposing Compound Library NO PAINS Compound Library Coagulation and Anticoagulation Compound Library

関連製品

同一標的の関連化合物
TD-5471 hydrochloride Metipranolol Metaproterenol hemisulfate DREADD agonist 21 Cisatracurium besylate Ecastolol Phentolamine Analogue 1 Clonidine

投与量変換

You can also refer to dose conversion for different animals. 詳細

In vivo投与量計算 (透明溶液)

ステップ1: 以下の情報を入力してください
投与量
mg/kg
動物の平均体重
g
動物あたりの投与量
ul
動物数
溶媒の組成を入力してください
% DMSO
%
% Tween 80
% ddH2O
計算する リセット

計算器

モル濃度計算機
希釈計算機
再構成計算
分子量計算機
=
X
X

モル度計算機では以下の計算が可能です

  • 既知の体積と濃度の溶液を調製するために必要な化合物の質量
  • 質量が既知の化合物を目的の濃度まで溶解させるのに必要な溶液の量
  • 特定の体積の中に既知の質量の化合物を入れて得られる溶液の濃度
参考例

モル濃度計算機を使用したモル濃度計算の例
化合物の分子量が197.13g/molである場合、10mlの水に10mMのストック溶液を作るのに必要な化合物の質量はどれくらいですか?
[分子量(MW)]の欄に[197.13]と入力してください
[濃度]ボックスに10と入力し、正しい単位(millimolar)を選択します
[容量]ボックスに10と入力し、正しい単位(milliliter)を選択します
計算を押します
答えの19.713mgが質量欄に表示されます

X
=
X

溶液を作るのに必要な希釈率の計算

溶液の調製に必要な希釈率の算出
希釈計算機は、既知の濃度の原液をどのように希釈するかを計算することができる便利なツールです。V1を計算するためにC1、C2&V2を入力します。

参考例

Tocrisの希釈計算器を用いた希釈計算の一例
50μMの溶液を20ml作るためには、10mMの原液を何ml必要ですか?
C1V1=C2V2という式を用いて、C1=10mM、C2=50μM、V2=20ml、V1を未知数とします。
濃度(開始)ボックスに10を入力し正しい単位(millimolar)を選択してください
濃度(終了)ボックスに50を入力し正しい単位(millimolar)を選択してください
体積(終了)ボックスに20を入力し正しい単位(millimolar)を選択してください
計算を押します
100 microliter (0.1 ml) という答えが体積(開始)ボックスに表示されます。

=
/

バイアルを再構成するのに必要な溶媒の量を計算する.

再構成計算機を使えば、バイアルを再構成するための試薬の量をすぐに計算することができます.
試薬の質量と目標濃度を入力するだけで計算します。

g/mol

化合物の化学式を入力して、そのモル質量や元素組成を計算します

Tヒント:化学式は大文字と小文字を区別します。: C10H16N2O2 c10h16n2o2

化合物のモル質量(分子量)を計算する手順:
化学物質のモル質量を計算するには、その化学式を入力し、「計算」をクリックしてください。.
分子質量、分子量、モル質量、モル重量の定義:
分子質量(分子量)とは、物質の1分子の質量であり、統一された原子質量単位(u)で表されます。(1uは炭素12の1原子の質量の1/12に等しい)
モル質量(molar weight)とは、ある物質の1モルの質量のことで、単位はg/molです。

bottom

技術サポート

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc.

Keywords

Naftopidil 57149-07-2 GPCR/G Protein Neuroscience Adrenergic Receptor hyperplasia BM 15275 KT-611 inhibit prostate pressure BM15275 KT 611 canine Inhibitor BM-15275 KT611 Beta Receptor prostatic inhibitor