ホーム 計算ツール
代理店ログイン

Longdaysin

カタログ番号 T5358   CAS 1353867-91-0

Longdaysin is an inhibitor of CK1α and CK1δ (IC50s: 5.6/8.8 μM). It also can inhibit ERK2 (IC50: 52 μM).

TargetMolの製品は全て研究用試薬です。人体にはご使用できません。 また、個人の方への販売は行っておりません。
Longdaysin, CAS 1353867-91-0
パッケージサイズ 在庫状況 単価(税別)
サンプルについてお問い合わせ
1 mg 在庫あり ¥ 7,500
5 mg 在庫あり ¥ 16,500
10 mg 在庫あり ¥ 27,000
25 mg 在庫あり ¥ 54,500
50 mg 在庫あり ¥ 87,000
100 mg 在庫あり ¥ 131,500
1 mL * 10 mM (in DMSO) 在庫あり ¥ 18,500
ご確認事項

1. 1研究室・グループあたり最大5製品までお申し込みいただけます。 同一製品は1回のみとなります。

2. 1回につき最大2製品までのお申し込みが可能です。

3. 2回目以降をご希望の際は、前回ご提供のサンプルの実験結果をオンラインでご提供いただく必要がございます。

4. 2023 年 1 月 20 日より前にサンプルをお申し込みいただいたお客様は、2023 年の無料申請枠にはカウントされませんが、以前の実験結果をご提供いただく必要があります。

Get quote
バッチを選択  
バッチの詳細情報はお問い合わせください
生物学的特性に関する説明
化学的特性
保存条件 & 溶解度情報
説明 Longdaysin is an inhibitor of CK1α and CK1δ (IC50s: 5.6/8.8 μM). It also can inhibit ERK2 (IC50: 52 μM).
ターゲット&IC50 CDK7:29 μM (cell free), ERK2:52 μM (cell free), CKIα:5.6 μM (cell free), CKIδ:8.8 μM (cell free)
In vitro Longdaysin inhibited CKIδ, CKIα, ERK2, and CDK7 activities (IC50?=?8.8, 5.6, 52, and 29 μM, respectively), while it had much less effect on p38α. The period of CKIδ deficient cells was 1.1 h longer than that of wild type cells. Longdaysin lengthened the period in a dose-dependent manner in CKIδ deficient cells as well as in wild type cells [1]. In breast cancer Hs578T and MDA-MB-231 cells, micromolar concentrations of longdaysin attenuated the phosphorylation of LRP6 and DVL2 and reduced the expression of active β-catenin and total β-catenin, leading to the downregulation of Wnt target genes Axin2, DKK1, LEF1, and Survivin [2].
In vivo In MDA-MB-231 breast cancer xenografts, treatment with longdaysin suppressed tumor growth in association with inhibition of Wnt/β-catenin signaling [2].
キナーゼ試験 The CKIδ, CKIα, CDK7, and ERK2 kinase assays were performed on 384-well plates (10 μl volume). The reaction mixture was as follows: for CKIδ, 2 ng/μl CKIδ, 50 μM peptide substrate RKKKAEpSVASLTSQCSYSS corresponding to human PER2 Lys659-Ser674, and CKI buffer (40 mM Tris, 10 mM MgCl2, 0.5 mM DTT, 0.1 mg/ml BSA, pH 7.5); for CKIα, 1 ng/μl CKIα, 50 μM CKI peptide substrate, and CKI buffer; for CDK7, 5 ng/μl CDK7, 100 μM Cdk7/9 peptide substrate, and CKI buffer; for ERK2, 1.5 ng/μl ERK2, 0.8 μg/μl MBP, and ERK buffer (50 mM Tris, 10 mM MgCl2, 0.5 mM DTT, 1 mM EGTA, pH 7.5). Five hundred nl of compound was added to the mixture (final 5% DMSO), and the reaction was started by adding ATP (final 5 μM). After incubation at 30°C for 3h, 10 μl of Kinase-Glo Luminescent Kinase Assay reagent was added, and the luminescence was detected to determine the remaining ATP amount. All of the tested compounds did not inhibit luciferase activity directly [1].
細胞研究 2×10^5 cells were suspended in 100 μL serum-free medium containing the indicated concentrations of longdaysin, and then seeded in 24-transwell chambers with 8 μm pore membrane. The lower chamber contained medium with 20% FBS. After incubation at 37°C for 6 hours, the unmigrated cells on the upper side of membrane were removed by a cotton swab, and the migrated cells were stained with crystal violet and stained cells were photomicrographed. For invasion assays, the transwell chambers with 8 μm pore membranes were coated with Matrigel [2].
動物実験 MDA-MB-231 cells were injected s.c. into the right flank of nude mice (1×10^7 cells per mouse), and tumor growth was closely observed and measured every 3 days. When the tumors reached approximately 50 mm3, the mice were randomly divided into two groups (eight mice per group) and i.p. injected with the vehicle (0.8% DMSO/12% Cremophor/8% ethanol in normal saline) or 5 mg/kg longdaysin in vehicle every 3 days. This longdaysin dosage was selected based on results from preliminary experiments, and was well tolerated in the mouse model. Subsequently, tumor volumes were measured with a caliper and calculated as follows: 0.523×(length)×(width)2. After treatment for 3 weeks, the mice were sacrificed and the tumor tissues were collected and weighed before being fixed in buffered formalin [2].
分子量 335.33
分子式 C16H16F3N5
CAS No. 1353867-91-0

保存条件

Powder: -20°C for 3 years | In solvent: -80°C for 1 year

溶解度情報

DMSO: 100 mg/mL (298.21 mM)

H2O: Insoluble

参考文献

1. Hirota T, et al. High-throughput chemical screen identifies a novel potent modulator of cellular circadian rhythms and reveals CKIα as a clock regulatory kinase. PLoS Biol. 2010 Dec 14;8(12):e1000559. 2. Xiong Y, et al. Longdaysin inhibits Wnt/β-catenin signaling and exhibits antitumor activity against breast cancer. Onco Targets Ther. 2019 Feb 5;12:993-1005.

関連化合物ライブラリー

この製品は下記化合物ライブラリに含まれています:
Kinase Inhibitor Library Anti-Cancer Active Compound Library Inhibitor Library NO PAINS Compound Library Anti-Pancreatic Cancer Compound Library Anti-Obesity Compound Library Anti-Liver Cancer Compound Library Glutamine Metabolism Compound Library Immunology/Inflammation Compound Library Anti-Breast Cancer Compound Library

関連製品

同一標的の関連化合物
Olomoucine Honokiol MEK-IN-6 KO-947 SUN11602 trans-Zeatin Sulforaphene Lidocaine

投与量変換

You can also refer to dose conversion for different animals. 詳細

In vivo投与量計算 (透明溶液)

ステップ1: 以下の情報を入力してください
投与量
mg/kg
動物の平均体重
g
動物あたりの投与量
ul
動物数
溶媒の組成を入力してください
% DMSO
%
% Tween 80
% ddH2O
計算する リセット

計算器

モル濃度計算機
希釈計算機
再構成計算
分子量計算機
=
X
X

モル度計算機では以下の計算が可能です

  • 既知の体積と濃度の溶液を調製するために必要な化合物の質量
  • 質量が既知の化合物を目的の濃度まで溶解させるのに必要な溶液の量
  • 特定の体積の中に既知の質量の化合物を入れて得られる溶液の濃度
参考例

モル濃度計算機を使用したモル濃度計算の例
化合物の分子量が197.13g/molである場合、10mlの水に10mMのストック溶液を作るのに必要な化合物の質量はどれくらいですか?
[分子量(MW)]の欄に[197.13]と入力してください
[濃度]ボックスに10と入力し、正しい単位(millimolar)を選択します
[容量]ボックスに10と入力し、正しい単位(milliliter)を選択します
計算を押します
答えの19.713mgが質量欄に表示されます

X
=
X

溶液を作るのに必要な希釈率の計算

溶液の調製に必要な希釈率の算出
希釈計算機は、既知の濃度の原液をどのように希釈するかを計算することができる便利なツールです。V1を計算するためにC1、C2&V2を入力します。

参考例

Tocrisの希釈計算器を用いた希釈計算の一例
50μMの溶液を20ml作るためには、10mMの原液を何ml必要ですか?
C1V1=C2V2という式を用いて、C1=10mM、C2=50μM、V2=20ml、V1を未知数とします。
濃度(開始)ボックスに10を入力し正しい単位(millimolar)を選択してください
濃度(終了)ボックスに50を入力し正しい単位(millimolar)を選択してください
体積(終了)ボックスに20を入力し正しい単位(millimolar)を選択してください
計算を押します
100 microliter (0.1 ml) という答えが体積(開始)ボックスに表示されます。

=
/

バイアルを再構成するのに必要な溶媒の量を計算する.

再構成計算機を使えば、バイアルを再構成するための試薬の量をすぐに計算することができます.
試薬の質量と目標濃度を入力するだけで計算します。

g/mol

化合物の化学式を入力して、そのモル質量や元素組成を計算します

Tヒント:化学式は大文字と小文字を区別します。: C10H16N2O2 c10h16n2o2

化合物のモル質量(分子量)を計算する手順:
化学物質のモル質量を計算するには、その化学式を入力し、「計算」をクリックしてください。.
分子質量、分子量、モル質量、モル重量の定義:
分子質量(分子量)とは、物質の1分子の質量であり、統一された原子質量単位(u)で表されます。(1uは炭素12の1原子の質量の1/12に等しい)
モル質量(molar weight)とは、ある物質の1モルの質量のことで、単位はg/molです。

bottom

技術サポート

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc.

Keywords

Longdaysin 1353867-91-0 Cell Cycle/Checkpoint MAPK Metabolism Stem Cells Casein Kinase ERK CDK Cyclin dependent kinase inhibit Inhibitor Extracellular signal regulated kinases inhibitor