ホーム 計算ツール
代理店ログイン

Ozagrel

カタログ番号 T6236   CAS 82571-53-7
別名: OKY-046, Domenan

Ozagrel (Domenan) is a selective thromboxane A(2) (TXA(2)) synthetase inhibitor with IC50 of 11 nM for rabbit platelet, used for the improvement of postoperative cerebrovascular contraction and accompanying cerebral ischaemia.

TargetMolの製品は全て研究用試薬です。人体にはご使用できません。 また、個人の方への販売は行っておりません。
Ozagrel, CAS 82571-53-7
パッケージサイズ 在庫状況 単価(税別)
サンプルについてお問い合わせ
5 mg 在庫あり ¥ 7,500
10 mg 在庫あり ¥ 12,000
25 mg 在庫あり ¥ 20,000
50 mg 在庫あり ¥ 28,000
100 mg 在庫あり ¥ 42,000
200 mg 在庫あり ¥ 54,500
500 mg 在庫あり ¥ 91,000
1 mL * 10 mM (in DMSO) 在庫あり ¥ 13,000
ご確認事項

1. 1研究室・グループあたり最大5製品までお申し込みいただけます。 同一製品は1回のみとなります。

2. 1回につき最大2製品までのお申し込みが可能です。

3. 2回目以降をご希望の際は、前回ご提供のサンプルの実験結果をオンラインでご提供いただく必要がございます。

4. 2023 年 1 月 20 日より前にサンプルをお申し込みいただいたお客様は、2023 年の無料申請枠にはカウントされませんが、以前の実験結果をご提供いただく必要があります。

Get quote
バッチを選択  
バッチの詳細情報はお問い合わせください
生物学的特性に関する説明
化学的特性
保存条件 & 溶解度情報
説明 Ozagrel (Domenan) is a selective thromboxane A(2) (TXA(2)) synthetase inhibitor with IC50 of 11 nM for rabbit platelet, used for the improvement of postoperative cerebrovascular contraction and accompanying cerebral ischaemia.
ターゲット&IC50 TXA2 synthase:11 nM
In vivo Ozagrel (3 mg/kg) decreases both the area and volume of the cortical infarction after ischemia-reperfusion of the middle cerebral artery in rat. Ozagrel also has suppressive effects on the neurologic deficits in the microthrombosis rat model. Ozagrel improves the reduced spontaneously locomotor activity and the obstruction of motor coordination in the conscious cerebral ischemia-reperfusion mouse model. Ozagrel prevents oleic acid (OA)-induced thromboxane A(2) generation and subsequently increased total protein concentration and the numbers of macrophages and neutrophils in bronchoalveolar lavage fluid and increases monocyte chemoattractant protein-1 and interleukin-8 mRNA expression in the whole lung of guinea pigs. Ozagrel suppresses the decrease in specific gravity of the brain tissue induced by the occlusion-reperfusion in the conscious cerebral ischemia-reperfusion SHR model, and recovers the postischemic decrease in cortical PO(2) after middle cerebral artery occlusion-reperfusion in cats. Ozagrel administered intravenously 30 min before oleic acid injection prevents the decrease in Pao(2) and pulmonary vascular hyper-permeability in guinea-pigs. Ozagrel also prevents increases in lactate dehydrogenase activity, a measure of lung cell injury, TXB(2) and its weight ratio to 6-keto prostaglandin F(1alpha) in bronchoalveolar lavage fluid in guinea-pigs. Ozagrel also increases the level of 6-keto-PGF(1alpha), a metabolite of prostaglandin I(2) (PGI(2)), in the brain tissue after cerebral ischemia-reperfusion, and the administration of PGI(2) improves the reduced spontaneous locomotor activity in the conscious cerebral ischemia-reperfusion mouse model.
キナーゼ試験 In vitro kinase assays: The IC50 values for inhibition of enzyme activity are generated by measuring inhibition of phosphorylation of a peptide substrate. The intracellular kinase domains of EGFR and ErbB2 are purified from a baculovirus expression system. EGFR and ErbB2 reactions are performed in 96-well polystyrene round-bottomed plates in a final volume of 45 μL. Reaction mixtures contain 50 mM 4-morpholinepropanesulfonic acid (pH 7.5), 2 mM MnCl2, 10 μM ATP, 1 μCi of [γ33P] ATP/reaction, 50 μM Peptide A [Biotin-(amino hexonoic acid)-EEEEYFELVAKKK-CONH2], 1 mM dithiothreitol, and 1 μL of DMSO containing serial dilutions of Lapatinib beginning at 10 μM. The reaction is initiated by adding the indicated purified type-1 receptor intracellular domain. The amount of enzyme added is 1 pmol/reaction (20 nM). Reactions are terminated after 10 minutes at 23°C by adding 45 μL of 0.5% phosphoric acid in water. The terminated reaction mix (75 μL) is transferred to phosphocellulose filter plates. The plates are filtered and washed three times with 200 μL of 0.5% phosphoric acid. Scintillation cocktail (50 μL) is added to each well, and the assay is quantified by counting in a Packard Topcount. IC50 values are generated from 10-point dose-response curves.
別名 OKY-046, Domenan
分子量 228.25
分子式 C13H12N2O2
CAS No. 82571-53-7

保存条件

Powder: -20°C for 3 years | In solvent: -80°C for 1 year

溶解度情報

Ethanol: < 1 mg/mL (insoluble or slightly soluble)

H2O: < 1 mg/mL (insoluble or slightly soluble)

DMSO: 2.28 mg/mL (10 mM), Sonication is recommended.

参考文献

1. Ishitsuka Y, et al. J Pharmacol Sci, 2009, 111(2), 211-215. 2. Imamura T, et al. Arzneimittelforschung, 2003, 53(10), 688-694. 3. Ichikawa K, et al. Pharmacology, 1999, 59(5), 257-265. 4. Ishitsuka Y, et al. J Pharm Pharmacol, 2004, 56(4), 513-520. 5. Naito J, et al. Eur J Pharmacol. 1983, 91(1), 41-48.

関連化合物ライブラリー

この製品は下記化合物ライブラリに含まれています:
Inhibitor Library Anti-Cancer Drug Library Membrane Protein-targeted Compound Library Anti-Cancer Approved Drug Library GPCR Compound Library Drug Repurposing Compound Library Anti-Cancer Clinical Compound Library Anti-Diabetic Compound Library Coagulation and Anticoagulation Compound Library Anti-Hypertension Compound Library

関連製品

同一標的の関連化合物
OM-189 Dabigatran ethyl ester hydrochloride Thrombin inhibitor 1 Dabigatran Z-Gly-Pro-Arg-4MβNA Imitrodast Heparin sodium salt Edoxaban Tosylate Monohydrate

投与量変換

You can also refer to dose conversion for different animals. 詳細

In vivo投与量計算 (透明溶液)

ステップ1: 以下の情報を入力してください
投与量
mg/kg
動物の平均体重
g
動物あたりの投与量
ul
動物数
溶媒の組成を入力してください
% DMSO
%
% Tween 80
% ddH2O
計算する リセット

計算器

モル濃度計算機
希釈計算機
再構成計算
分子量計算機
=
X
X

モル度計算機では以下の計算が可能です

  • 既知の体積と濃度の溶液を調製するために必要な化合物の質量
  • 質量が既知の化合物を目的の濃度まで溶解させるのに必要な溶液の量
  • 特定の体積の中に既知の質量の化合物を入れて得られる溶液の濃度
参考例

モル濃度計算機を使用したモル濃度計算の例
化合物の分子量が197.13g/molである場合、10mlの水に10mMのストック溶液を作るのに必要な化合物の質量はどれくらいですか?
[分子量(MW)]の欄に[197.13]と入力してください
[濃度]ボックスに10と入力し、正しい単位(millimolar)を選択します
[容量]ボックスに10と入力し、正しい単位(milliliter)を選択します
計算を押します
答えの19.713mgが質量欄に表示されます

X
=
X

溶液を作るのに必要な希釈率の計算

溶液の調製に必要な希釈率の算出
希釈計算機は、既知の濃度の原液をどのように希釈するかを計算することができる便利なツールです。V1を計算するためにC1、C2&V2を入力します。

参考例

Tocrisの希釈計算器を用いた希釈計算の一例
50μMの溶液を20ml作るためには、10mMの原液を何ml必要ですか?
C1V1=C2V2という式を用いて、C1=10mM、C2=50μM、V2=20ml、V1を未知数とします。
濃度(開始)ボックスに10を入力し正しい単位(millimolar)を選択してください
濃度(終了)ボックスに50を入力し正しい単位(millimolar)を選択してください
体積(終了)ボックスに20を入力し正しい単位(millimolar)を選択してください
計算を押します
100 microliter (0.1 ml) という答えが体積(開始)ボックスに表示されます。

=
/

バイアルを再構成するのに必要な溶媒の量を計算する.

再構成計算機を使えば、バイアルを再構成するための試薬の量をすぐに計算することができます.
試薬の質量と目標濃度を入力するだけで計算します。

g/mol

化合物の化学式を入力して、そのモル質量や元素組成を計算します

Tヒント:化学式は大文字と小文字を区別します。: C10H16N2O2 c10h16n2o2

化合物のモル質量(分子量)を計算する手順:
化学物質のモル質量を計算するには、その化学式を入力し、「計算」をクリックしてください。.
分子質量、分子量、モル質量、モル重量の定義:
分子質量(分子量)とは、物質の1分子の質量であり、統一された原子質量単位(u)で表されます。(1uは炭素12の1原子の質量の1/12に等しい)
モル質量(molar weight)とは、ある物質の1モルの質量のことで、単位はg/molです。

bottom

技術サポート

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc.

Keywords

Ozagrel 82571-53-7 GPCR/G Protein Immunology/Inflammation Proteases/Proteasome Prostaglandin Receptor Thrombin TXA2 aggregation OKY046 OKY-046 Inhibitor Domenan OKY 046 thromboxane A2 antiplatelet inhibit platelet inhibitor